iDataStart ADS-THR-GM13 T-Harness for select GM Push-To-Start Models 2010 & UP

Description

Vehicle-specific T-harness for an iDatastart remote starter
iDatastart's GM13 T-harness connects their iDatastart CMHCXA0 HC remote start module (not included) to your select GM-built vehicle with push-to-start ignition. This T-harness plugs into your vehicle's electrical connectors, allowing you to start and stop the engine remotely, and control some basic factory security functions as well. Some wiring may be required — one to four connections, typically.
What's in the box:
24" T-Harness (27-pin & 25-pin plugs)
23" One-wire harness (MS3)
17" One-wire harness (JS6)
17" Two-wire harness (JS3)
Four 8" optional terminal wires (pinned for Molex plug)
- iDatalink ADS-THR-GM13 Factory
Vehicle-specific T-harness for an iDatastart remote starter
iDatastart's GM13 T-harness connects their iDatastart CMHCXA0 HC remote start module (not included) to your select GM-built vehicle with push-to-start ignition. This T-harness plugs into your vehicle's electrical connectors, allowing you to start and stop the engine remotely, and control some basic factory security functions as well. Some wiring may be required — one to four connections, typically.
What's in the box:
24" T-Harness (27-pin & 25-pin plugs)
23" One-wire harness (MS3)
17" One-wire harness (JS6)
17" Two-wire harness (JS3)
Four 8" optional terminal wires (pinned for Molex plug)
- iDatalink ADS-THR-GM13 Factory fit installation ‘T’-harness for Plug-N-Play installation
You Still Need a controller  FT-DC3-LC or FLRSBA to complete Installation.
This T-HARNESS is a Plug-N-Play system which is SAFE and Saves you lots of installation time.
DC3 or FLRSBA require a cable (ADS-USB or FLPROG, Not Included. Sold Separately) for you to flash software from computer. You will need to log in iDatalink website to be able to flash.