Fortin EVO-CHRT5 Bypass Module Combo - Chrysler/Dodge/Jeep EVO-ALL & THAR-CHR5

Description

EVO-ALL Features:
3x on-board LEDs for simplified programming and diagnostics.
1x preloaded firmware for maximum compatibility.
4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.
20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly
Communication Ports
3x CAN-Bus controllers.
3x General purpose controllers (J1850, Class 2, encrypted key etc.).
2x On-board Relays (SPDT).
1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX).
1x TB control
EVO-ALL Features:
3x on-board LEDs for simplified programming and diagnostics.
1x preloaded firmware for maximum compatibility.
4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.
20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly
Communication Ports
3x CAN-Bus controllers.
3x General purpose controllers (J1850, Class 2, encrypted key etc.).
2x On-board Relays (SPDT).
1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX).
1x TB control port for TB-series modules
THAR-CHR5 Features:
EVO-ALL T-Harness for Chrysler, Dodge and Jeep vehicles
T-Harness connectivity with EVO-ALL
on SELECT 2008-2013 Chrysler, Dodge, and Jeep
regular key vehicles
T-Harness connects directly at the ignition column for plug-and-play installation for remote-starter
Some connections may still be required.
** These units required to be flashed/updated with a flashlink2 cable in order to set them up to use with your OEM key fob remote. Out of the box this unit will not funtion with your OEM remotes.
**  T-Harness may not complete installation and some wires may need to be hard wired into vehicle similar to a typical car starter install.
**  Check manufactorers web site to make sure your vehicle is comatible with this system